V2 Clock:  Wireless Wall Clock Hidden Video Camera

The V2 Wireless Hidden Wall Clock Camera Nanny Cam features the smallest pinhole camera in the world which is covertly designed in to this fully functional and elegant wall clock. The full color camera gains signal from this high powered 2.4GHz receiver which will capture a view clearly throughout any room while transmitting a signal up to 1,000ft line of sight and 800ft through walls. This unit features built in video functions offering real time recordings with no motion blurs or time delay. Everything is easy to set up and connect within minutes using a TV/LCD Monitor, VCR, DVR, Quad Processor, or PC Video Card. Simply plug and power the camera and receiver then connect the RCA cables from the receiver to your video source for 24/7 surveillance. Easy for you to install, mount, and monitor. All accessories are included with full USA warranty.

 

Camera Specifications:
Picture Sensor:	1/4 Sharp
System:	NTSC or PAL
Resolution:	380 Lines
Minimum Illumination:	2 LUX
Voltage:	8V DC
Size:	20 x 20 x 20(mm)
Receiver Specifications:
Operation Frequency	2.4GHz
Voltage:	12V DC
Product Rating by Customer:

Purchase Includes:

1 X Wireless Hidden Wall Clock Camera
1 X Video Receiver
2 X 9V Wireless Battery Attachments
1 X RCA Video Cable
1 X 12V DC Power Supply for Receiver     1 X 8V DC Power Supply for Camera

Color

BlackSilverTanGreenNavy BlueIce BlueWhite

$79.99

Instruction Guide:

1- Connect the antenna to the receiver. 2- Connect your RCA video cable from the receiver to your recording device such as TV, VCR, DVR, Quad Processor, or PC Video Card. (For TV/VCR switch TV/AV or Video 1, Video 2, etc.) 3- Connect and power the receiver with a 12V DC power supply. (Indicator light turns ON) 4- Connect and power the camera with a 9V battery for wireless use or an 8V DC power supply for wired use. 5- Adjust the tune knob of the receiver until TV or Monitor focuses a picture. 6- Slowly turn the camera lens to focus view.

Do not allow over exposure to direct or constant sunlight. Clean surfaces with a dry, smooth cloth. Chemicals should not be used. Moisture can damage the camera and also create the danger of an electric shock.

For Wireless Camera Systems: DO NOT place the products too close to medical equipment. Radio waves may potentially cause breakdown of medical electrical equipment and thus cause incidents. DO NOT place the products within 22cm from an active heart pacemaker. Radio waves may potentially influence a heart pacemaker and thus lead to respiratory disturbance. DO NOT use the products to carry out illegal activities. Our products are offered for recreational monitoring. Agents Eye & AgentsEye.com are not responsible for your use or neglect of our products. Click here for more...